Garage doors have two main kinds of springs. Extension springs run above the horizontal tracks on either side of your garage. They get their power by extending. Torsion springs run along a bar you can observe above your garage door when it is closed. Torsion springs get their strength from twisting.

If one of these springs is broken it might be hard or definitely not possible for you or your opener to open your door. This attribute of garage doors is just what can turn a pleasurable day into somewhat of a nasty day, specially if your auto is stuck in your garage and that you must go somewhere, like work.

If you have extension springs and one of them is broken, you may be able to locate a replacement and change it yourself. However torsion springs are another matter. If you have a broken torsion spring you ought to get in contact with a garage door company to carry out the repair unless you have been specially taught on replacing torsion springs.

This information may help you Recommended Site

There are some repairs you could make in your garage door. One of many options of a garage door opener is that it has stop reverse lights that are designed to stop your garage door from closing if one thing is obstructing its path.

At the foot of the tracks on either side of your garage door opening, you may most likely see a set of stop/reverse lights. These lights are actually a transmitter plus a receiver of infrared beams. If the beam is interrupted your door will stop going down, turn around and go all the way back up. Typically your garage door light will flash when this happens.

Does your garage go down, then back up for no noticeable reason? If you have carefully checked for an object blocking of the door and can't find anything, you may have bumped your stop/reverse lights out of alignment.

The major cause that your door will stop and reverse is that your "eyes" are functioning just as they are designed to. There is an object blocking your garage door. Sometimes whatever is blocking the door is not apparent, so carefully look around your garage door opening. Ultimately you'll figure out what it is.

If there's nothing apparently blocking your garage door, don't pull your hair out. There's one more thing to try. Get a paper wipe and wipe the lenses on your stop/reverse lights. Now and then condensation or a small bug or dust particle can get on the lense and cause all your stop/reverse problems.

If your door is still acting irradically the difficulty may not be your stop/reverse lights after all. You may have a issue with the logic board or the gear sprocket in your opener.

Both of this stuff can be repaired by the enterprising property owner if he so choses. However for both of them you'll require the parts. You could have the ability to buy a gear sprocket replacment kit at one of the large field stores. For the logic board, you will need to talk to the supplier of your opener.

For more information try this garage door repair.

Since garage doors don't fail to work very often, most people are caught unaware of what to do to get it fixed. Most people make some attempt to trouble shoot their issue before they give up and phone a garage door company. Hopefully this article has given you some insight into what items you can fix yourself and what items should best be left to a professional.