There are 2 kinds of springs in garage doors. There's torsion springs which are mounted above the door opening and pressure springs which are installed down both tracks. Both tension springs and torsion springs serve the identical purpose, they deliver a lot of the power that allows you or your opener to open your door.

The malfunction of either one of the two springs on your garage door can most likely keep you from being capable to open your garage door.

Require aid soon? Try this news

If one of your garage door springs is damaged, there's very little the typical dwelling owner can do for herself. The one actual alternative is to get in touch with a garage door company. They are always available visit and substitute your springs.

There are a number of things regarding your garage door that you can trouble shoot and repair youself. If you have a garage door opener then you also have some type of interrupter device that can keep your door from closing if something is in the way. Frequently they are stop/reverse lights.

At the foot of the tracks on either side of your garage door opening, you may most likely discover a pair of stop/reverse lights. These lights are actually a transmitter plus a receiver of infrared beams. If the beam is broken your door will stop going down, turn around and go all the way back up. Frequently your garage door light will flash when this happens.

Occassionally your garage door's "eyes" may get bumped in such a way that they are no longer pointing in the direction of each other. If that is the case, cautiously adjust the beams. Do not strike them with a hammer. There are adjusting brackets attached to the tracks that ought to be adjusted with a screw driver.

The main cause that your door will stop and reverse is that your "eyes" are operating exactly as they are supposed to. There is an object blocking your garage door. Sometimes the object that is blocking the door is not apparent, so vigilantly look around your garage door opening. Ultimately you'll figure out what it is.

If there's nothing obviously blocking your garage door, don't tear your hair out. There's one more thing to try. Take a paper towel and wipe the lenses on your stop/reverse lights. Every so often condensation or a little bug or dust particle can get on the lense and cause all your stop/reverse problems.

Another cause of an unreliable garage door is that your opener's logic board or gear sprocket has malfunctioned.

Both of these things can be corrected by the enterprising home owner if he so choses. However for each of them you will require the parts. You could be able to acquire a gear sprocket replacment set at one of the huge box stores. For the logic board, you will have to contact the manufacturer of your opener.

Check here for futher information replacement garage door opener remote

One of the good things regarding garage doors is that they are very dependable. Most people go years and years without a difficulty. That means that when a issue does develop, it is often a new experience for a home owner. With any luck your repair will be simple and the cost affordable. Good luck!